Recent content by Herr_Sprecker

I do appreciate the suggestions of RS232 over ethernet. Unfortunately I'm not able to get that equipment for this particular rig, and the ethernet port on the projector itself doesn't listen to RS232 commands, so I'm kind of stuck with the web interface method right now.

I greatly appreciate this assistance. I've attached an image of the web interface for the projector, it consists of a dropdown for on/off and a Set button, along with the html code:So, because it's a dropdown and THEN a button push, does that change the configuration significantly? The...

Not being up on scripting, would anyone have a resource on online guide I could tap into that could explain how to script the get/post url code? That's what I need assistance with.These projectors do have the network port, wish they did more than just html and PJ. I don't know that I can...

Greetings all! Would like to see if there are any script-knowledgable people out there who could help me.I am running a MacBook Pro with QLab 4 installed, full license bundle. Using a network port, it is linked to a network switch. Also connected to the switch are 3 EIKI LC-XL100...

I appreciate the information greatly! Unfortunately this is way out of our budget, and this is a more situational need with projections, so the investment would not pay off in other productions. I heard back from the folks at Creative Conners, our Pushstick unit will drive the drum rotation...

Greetings all. I was wondering if anyone has had experience in creating a 'magic' opening door without using any manner of electronics or such.Here's the situation. We're gearing up for a production of Nutcracker, one that we remount every few years. One of the dancing toy dolls is removed...

I appreciate those suggestions. Unfortunately we only have about 8-10 inches worth of moveable space between the back of the wall and some of the theatre architecture. Moving it up and down on a frame has also been considered but unfortunately there's not enough clearance above to get it fully...

Greetings all. For a show we are currently doing the finishing touches on, there is an arched opening at the center of upstage. For the design, the intent is to fill this arched opening with an RP screen for projected imagery. At at least one or two times during the show, the screen will need...

I am looking to purchase an ETC Nomad. It would be connected to a MacBook Pro 2019 model. If I were to buy it to its maximum unlocked potential (6144 outputs), can I send that output via a network cable into an ETCNet network, or would I need enough Gadget II units to cover all 6144 outputs...

Apologies if this subject has been discussed in other forum posts. I am seeking some equipment advice to create a classroom for teaching theatrical sound design. My current plan is two computer workstations (mac), and a powered speaker environment that will be flexible to reasonably simulate...

Greetings. I have an LS9-32 I'm working on, and I'm experiencing a very strange issue. I have the effect input routed from a mix, fairly straightforward, and the overal sound is what I'm after. What's curious is the outputs. I've tried it with an output patch directly to the mixes I want it...

Would you have some suggestions for a particular PA amplifier? I'd need one with at least 2 inputs, one of which would be a feed from our sound console and/or an area pickup microphone.Thanks!

Good day all. Apologies if this subject has already been covered in another thread that I just didn't come across.I'm speccing out a system for backstage monitoring. The theatre I am at has just built a new building attached to the performance space, so we have brand new dressing rooms...

Withdrawn, disregard.

Greetings. I've been having difficulty trying to get an iRFR network setup for an ETC Ion. The Ion's software has been updated to the latest version.My confusion lies mostly in what needs to be set on the Ion vs what needs to be set in the wireless router itself, with regards to IP...