microstar
Latest activityPostingsAbout
-
-
microstar replied to the thread Patch panel to light board.Per your previous posts, the dimmer specs say there is a standard analog 0-10vdc output from each channel of your control console to... -
Update: We did finally get the freight lift repaired, after 3 years, and our latest coat of paint, while not ToughPrime, is holding up...
-
microstar replied to the thread Dove SceneMaster.Hope this is not too late, but I just found info from Rich at Dove when I had an issue with submasters not recording on a TechMaster a...
-
microstar reacted to derekleffew's post in the thread 1977 Strand Century Lighting System with
Like.
The only place with even a hope of schematics would be one of the vendors already listed in post#2 above. -
microstar replied to the thread 1977 Strand Century Lighting System.I don't have the schematic but here is a spec sheet.
-
microstar replied to the thread Dove SceneMaster.Rich Howe is your man at Dove Systems. Great guy and always very helpful. Give him a call at 805-541-8292. Do you mean that you can no...
-
microstar replied to the thread DMX-sensing Relay?.Yep, adding the diode does appreciably increase the delay. Thanks for continuing to think about this! I did test with two different...
-
microstar replied to the thread DMX-sensing Relay?.I tried this and it didn't stop the chattering, BUT, I changed the capacitor to 10mfd and it seems to work great...very solid relay...
-
microstar replied to the thread DMX-sensing Relay?.Yep, good ol' Forrest Mims, circa 1996. Here is my collection:
-
-
microstar replied to the thread DMX-sensing Relay?.So in my quest to come up with a DMX-sensing relay by spending $500 in my labor vs. $296 for the ETC CSR-D unit, I have built the...
-
-
microstar replied to the thread Control/Dimming Is Teatronix still in business?.Received word today from the owner that Teatronics is still alive, just having some website and telephone issues. Website is back up now.
-
microstar replied to the thread DMX-sensing Relay?.Great info, thanks so much!
-
microstar replied to the thread DMX-sensing Relay?.I saw their website was still active a year or two ago after I found out the owner had died. Thinking someone had taken it over, I...
-
microstar replied to the thread DMX-sensing Relay?.My use case: I have two sources of DMX in a small theatre. A conventional 48-channel console with manual faders and a Fleenor PRE-10A...
-
Does anyone know of a small pc board (like the cheap import 3-channel DMX relay boards) that is not DMX address based? I need a unit...
-
-
Loading…
-
Loading…
