-
-
MMalabaristo replied to the thread Reference databases for material acoustics....Not an acoustician, but my instinct lines up with yours: somewhere in the range of zero to imperceptible. I would also flat out refuse...
-
MMalabaristo replied to the thread Etc to aurduino.There is a record/playback option for capturing sACN, (or Art-Net, etc), or DMX (with appropriate interfaces) using a Raspberry Pi and...
-
MMalabaristo replied to the thread Wrong size pipe problems.I know I found a tube & coupler scaffold design guide that had a variety ratings several years ago when looking into it for a scenic...
-
-
MMalabaristo replied to the thread Wrong size pipe problems.Please clarify what you mean by horizontal vs. vertical loading... in this case, don't the cross-pipes that the fixtures are hanging...
-
MMalabaristo replied to the thread LED Cycs.I have S4LED Series 1 fixtures with cyc adapters and I have to tilt them down for clearance every time we set our orchestra shell, so I...
-
MAnd pipe is not really measured by inside diameter either (1.5 sch 40 is 1.610" internal and 1.9" external), but some nominal or legacy...
-
MAs Kyle said above, cast floor flanges, are not meant to be used in rigging, and while cheeseburgers are not "ANSI Approved for Overhead...
-
MMalabaristo replied to the thread Wrong size pipe problems.And not only that, but any use in a pipe grid is going to be pretty darn similar to the type of scaffolding applications they were...
-
MMalabaristo replied to the thread Quality of audio "Sinfonia"/"OrchExtra"/"InstrumentalEase".I hadn't heard of it before, so I was doing some reading on MTI's website and found this FAQ that includes a note about a free trial...
-
MMalabaristo replied to the thread Telex 2 channel Wired and Wireless setup suggestions.I believe the wired com connections on the BTR800 are configurable for either ClearCom or RTS, so what you have now makes sense if I...
-
MMalabaristo replied to the thread Painting new masonite (hardboard) overlay.I would guess price... but Plyron isn't exactly cheap either.Contractors at one of my schools did just use MDO to patch a section of...
-
MMalabaristo reacted to MNicolai's post in the thread Speakers have rotated to wrong angle with
Like.
Speakers look like Innovox but could be something else. Probably weren't torqued down adequately the first time and vibrated loose... -
MI think the OP is looking at the upper column loudspeakers, particularly House Right. Looking at the House Left main PA, it appears to...
-
MMalabaristo replied to the thread Speakers have rotated to wrong angle.Pictures of everything would help a lot in being able to provide suggestions. My immediate response is that if you think their position...
-
MMalabaristo replied to the thread Etcnet2 Node Dropping edmx.You are indeed remembering correctly that NET2 doesn't play nicely with IGMP. I don't know if there's a way to make it work, but the...
-
-
Loading…
-
Loading…
